Categories
Home » BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9%

BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9%

BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9%
BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9% BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9% BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9% BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9% BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9% BSIDE EMT01 DIGITAL MOISUTRE METER/Resolution:+-0.1%/Accuracy up to 0.5%/Range:0~99.9%
Product Code: AG54253
Shipping: $1.99
Availability: In Stock
Price: $18.71
Qty:  
   - OR -   
Introduction:

Congratulations on your purchase of this Moisture Meter. This instrument is a conductivity moisture meter specifically designed for the wood industry.
The instrument has four calibration scales, enabling the user to take accurate moisture measurements in 100 wood species. Moisture measurements can be taken using the integral pin electrodes.
This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.

Operation:
Caution: The electrode measurement pins are extremely sharp. User care when handling this instrument. Cover the pins with the protective cap when the instrument is not in use.

Measurement Instructions:
1. Remove the cap to expose the needle electrodes.
2. Power ON the Instrument.
3. Select the appropriate wood calibration scale A, B, C, D (See the Wood Calibration Tables later in this guide) Using "MODE" button.
4. Push the needle pins into the wood and observe the reading.
5. Power OFF the instrument.

Auto Power OFF:
This instrument will be Auto Power OFF if there is no any button pressing in 15 minutes. This design is for saving battery power consumption.

Care and Maintenance:
When the instrument is not in use, store the instrument in a stable, dust-free environment out of direct sunlight. Remove the battery from the instrument if it is to be stored for periods of more than one month, or when the low battery power symbol appears on the display.

Battery replacement
When the low battery icon appears on the display, replace the battery as soon as practical.
1. Remove the rear battery compartment cover.
2. Replace one 9V battery.
3. Cover the compartment door.

Specifications
Display: Large LCD characters display
Measurement principle: Electrical resistance
Range: Wood: 0~99.9%
Resolution: 0.1%
Accuracy: ±0.5%
Electrode length: 10mm(0.4")
Electrode pins: Integrated
Auto Power OFF: After approx.15 minutes
Power Supply: One 9V battery
Meter housing: ABS plastic
Operating Temperature: 0 to 40 (32 to 104)
Dimensions: 145 X 67 X 32mm (5.7" x 2.6" x 1.3")
Weight: 200g (7.0 oz)

Wood Species Group Table
Wood Group
 Wood Species
A
 Teak, Walnut, Afrormosia,
B
 Keruing, White Poplar,
C
 Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
D
 Basswood, Larch, Pine, Birch
Auto gadget wholesale shop © 2024